Yellowing resistance flexible ultra clear liquid two-part PU polyurethane adhesive

1) high performace polyurethane adhesive
2) water clear
3) UV resistance
4) non-yellowing
UV and yellowing resistance flexible ultra clear liquid two-part PU polyurethane adhesive

INTRODUCTION
PU245AB is a two-part, water clear, flexible, liquid polyurethane resin; it has best UV and yellowing resistance, anti-bending, anti-aging, and fast dry speed. It is widely used in:
1) LED strips encapsulation
2) PU polyurethane doming
3) Non-yellowing coating
PROPERTIES

PU245A
PU245B
Color
Water clear
Water clear
Viscosity cps/25°C
300~500
300~500
Specific gravity
1.03
1.03
APPLICATION CONDITIONS
Mix Ration (weight)
PU245A:PU245B=1:1
Pot Life (at 25
°C
)
20~30 min (After Mixing)
Cure
25°C×16~24h or
50°C×1.5h + 60°C&tim es;1h
CURED PROPERTIES
Hardness (Shore D)
55~65
Volume resistivity (ohm-cm)
>10
15
Surface resistivity (ohm)
>10
14
Dielectric constant (KHZ)
4.2±0.1
Bending strength (kg/mm
2
)
>10
Impact strength(kg/mm
2
/cm
2
)
>6

1503 pre-applied PU threadlocker sealant

Suitable for manual operations.Can be used in galvanization pipe fitting.
White water based pre-applied thread sealant.
1503 pre-applied thread sealant:
Suitable for manual operations.Can be used in galvanization pipe fitting.
White water based pre-applied thread sealant.

Technical Date Sheet:
Product Number
Container
Color
Work Tenperature(°C)
Break torque(N.m)
Fixture time/Full cure time
Seal capability
Re-useable
Lubricate
1200
500g
Yellow
-50~150
24
10min/72hrs
/
/
Low
1201
1kg
Yellow
-50~200
24
10min/72hrs
/
/
Low
1204
500g
Pink
-50~150
30
10min/72hrs
/
/
/
1503
2kg
White
-50~150
/
/
Seal instantly
Yes
High
1513
1kg
White
-50~150
/
/
/
/
/
1516
2 kg
Brow
-50~150
/
/
Seal instantly
Yes
High

76 Not contain styrene and non-toxic Epoxy Resin joint filler

1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique

This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.

Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barr el)
30kg/group(A~20kg. B~10kg)

503 carbon fiber fabric for structure and building

1 carbon fiber fabric is a unidirectional
2 resist tensile, shear and seismic reinformance
3 character constancy.durability
Carbon fiber fabric is a unidirectional and compiled structural reinforcement material,
tha characters: resist tensile, shear and seismic reinforcement .applying to reinforcement of building
bridges, piers, bridges, tunnels, chimney, column and beam structure and so on.

Name
Carbon fiber fabric (1 grade)
Carbon plate (1 grade)
Tensile ( MPa )
≥3539
≥2400
Elastic modulus (MPa )
≥2.4*105
≥ 160000
Elongation %
≥1.7
≥1.7
Flexural strength (MPa )
≥718

Shear (MPa )
≥45

Weight g/m2
200
300

Thickness mm
0.111
0.167
1.1/1.2/1.3/1.4/1.5
Width cm
20/30/50
50/60/80/100

CW-M-108 Battery sealant

The resin glue is applied to bond shells of storage battery for automobiles.
Main Features:
1.Good fluidity,Stable performance,the Cohesive Strength is immune to long time strong acid corrosion.
2.Low viscosity,free of bubbles and good tenacity.
3.Good procesibility,curing at normal temperature or heat curing,easy to operate.

Index
Group A
Group B
Appearance
Pale yellow transparent liquid
Pale yellow transparent liquid
(25°C mpa.s) Viscosity
1500-3500
50-170
25°C g/cm3 Density
1.05-1.15
1.00-1.10
Blending ratio (amounts by weight)
2
1
25°C mpa.s) Mixture Viscosity
550-850
Mixture firm time
25°C auto-solidification
24h
60°C solidification
90min
(25°C)Serviceable time
blend weight 300g 25min
Cohesional strength or our
dra wing strength
early
8.0
+
1MPa
after pickling
above 80% early
company's ABS test piece
shearing strength
early
4.0
+
1MPa
after pickling
above 80% early
hardness(Hp)
Firm early
≥75
Weight change after pickling
≤2%

polyester hotmelt adhesive film

1.Brand:Farseeing
2.Name:hotmelt adhesive film
3.Material:polyester
4.Spec:Y1201f
5.Mobile:0086-18939758527
Y1201f(COPES hotmelt adhesive film)

The product is a kind of a latest environmental protection product.It is of soft hand,high bond intensity,good resistance to dry cleaning and 40°C laundrying.
It is widly used in embroidery badges,automotive upholstery,kinds of labels,interior decoration,thermal and sound insulating materials etc.

Performance characteristics are as follows:
1. The various types of textiles, metal materials, such as , badge,Embroidering with excellent adhesion properties.
2. A good washing resistance properties of 40 degrees.
3. This product is non - formaldehyde, non-toxic, is environmentally friendly products.
4. Breadth(cm):50cm/100cm/137cm
Product Specif ications are as follows:
1. Appearance: milky white translucent with imports release paper
2. Material: PES
3. Melt Range:105-115 °C
4. Press- temperature :130-155 °C
5. The proposed processing pressure: 0.5 -1.5kg/cm2
6. Recommended processing times :10-20 sec

Contact info:
Tel:0086-21-59503650etx809
Mobile:0086-18939758527

YT650 HIGH-TEMP RTV SILICONE SEALANT

YT HIGH-TEMP RTV SILICONE SEALANT valve covers, oil pans, exhaust manifolds, excellent heat control and torque retention.
YT HI-TEMP RTV SILICONE INSTANT GASKET

is based on repairing norm for China auto company to develop neutral silicone sealant.The gaskets are enable to resist high Pressure, cracking, shrinking and migrating caused by thermal cycling. Temperature range from -85°F to 580°F (-65°C to 300°C) intermittent, ideal for water pumps and thermostat housing. Valve covers, oil pans, exhaust manifolds, intake manifolds, timing covers, excellent heat control and torque retention.

DIRECTIONS:
1.

Clean and dry surfaces, erase completely all dirt & grease with a residue free solvent.
2.

Take away the cap, puncture the inner seal, and screw on the nozzle cut at the desired bead sise.3.
Apply the beads evenly around the perimeter or one surface.
4.
Normally material skin in 15 minutes, assemble parts once silicone skins over.
5.
Sealant is fully cured in 24 hours. Use the knife to remove excess silicone.
6.

Clean the nozzle and put back the cap tightly after use. If the sealant cures in the nozzle,
remove the cured plug with a pin or paper clip.

NOTE:
1.
Flexible and stable at all temperatures from -85°F to 580°F (-65°C to 300°C).
2.

Not recommended for continuous immersion in gasoline.
3.
Do not use instant gasket only when replacing cylinder head gaskets with predetermined
Tolerances.

CAUTION:
1.

On contact, uncured sealant causes irritation, avoid contact of eyes and skin. In case of contact,
Flush eyes with water, remove from skin with a dry cloth and call physician immediately.
2.

Use with adequate ventistion.
3.

Use lid to tightly seal if it was not used up. Keep out of reach of children.

Polyurethane adhesive

PU adhesive,non-yellowing,heat-resistance,moderate tack life,easily use,widely used in TPR,PVC,rubber,PU,EVA,leather,etc.
PU adhesive
non-yellowing,heat-resistance,moderate tack life,widely used in TPR,PVC,rubber,PU,EVA,leather,etc .

Packing:3kgs,15kgs per bucket.

hot melt glue for baby diaper

1)hot melt adhesive for construction application
2)ISO,SGS,VOC,FDA certific
3)composition:thermoplastic rubber&synthetic resin
This type hot melt adhesive is designed for construction application of sanitary napkins
and diapers.

With light initial color,good heatstability and excellent sprayability, it can well bond PE film, nonwoven, porous film and tissue.

Composition
: Synthetic Resins
Toxicity
: None
Gardener Color
: 3~4
Brookfield viscosity
:
175°C ------------1100 Cps (as reference)
Ring and Ball softening point
: 80 ºC
Holding power:
more than 24 hours
Peel strengh : >15
N\inch
Foreign materials
: Invisible by naked eyes
Recommended application temperature
: 110~150 ºC
Shelf Life
: 1 Year in dry and cool environment
Packaging
: 20Kgs /carton, cakes wrapped with specially-designed meltable film


hot melt adhesive for sanitary napkins and diapper construction



←hot melt adhesive for PET MAT construction



Jaour products ----hot melt adhesive for hygienic industry.

HM-500 Injectable Epoxy Resin Glue for Rebar Chemical Anchor

1.Bicomponent modified epoxy resin injection anchor adhesive
2.Styrene free
3.Good thixotropy
4.Heat-resistant
HM-500 Injectable Epoxy Resin Glue for Rebar Chemical Anchor is a two-component, 3:1 ratio, high solids, modified epoxy resin adhesive for use as a high strength, non-shrink anchor grouting material.

1.
Uses
a)
Secure rebar or threaded rods to concrete
.
b)
Fix drying hanging brackets on curtain walls and stone materials.
c)
Strengthen building structures.
d)
Fix many devices.
e)
Connect steel structures with concrete structures.
f)
Reinforce railways, public roads, bridges, water conservancy facilities and other projects which are reconstructed and extended.
g)
Fix advertisement boards, tunnel pipe lines, elevated road noise barriers and barricades.
h)
P ick-proof sealant around doors, windows and fixtures.
i)
Paste-over for crack injection.

2.
Advantages
a)
Modified epoxy resin, styrene free, safe and non-toxic.
b)
High strength, strong adhesion, good toughness, effect is equivalent to be embedded.
c)
Aging resistance,
acid-alkali resistance,
no expansion, no creep,
good
seismic resistance performance and heat-resistant performance.
d)
Low moisture sensitivity
,
long-term load stability in a damp environment.
e)
Good thixotropy, especially suitable for anchoring the side or top.
f)
Resin and hardener are packaged by twin cartridge
and
mixed simultaneously through the mixing nozzle
by special dispenser gun, which do not need manual mixing.

3.
Physical Data

Appearance

Component A (Resin): white paste
Component B (Hardener): red or black paste
Volume solids
≥99.5% (solvent free)
Mix ratio o f volume
A : B = 3 : 1
Density of A & B mixed
1.50 ± 0.10 g/cm
3
Viscosity of A & B mixed

18
~
22 Pa·s

acrylic drum material

adheres to all substrates and has an anti-fungal feature to prevent mould in high humidity areas.

Test standard: JC/T 484-2006 (Acrylic sealant for building)

A high quality, long lasting sealant for many of those jobs such as cracks and holes that occur either naturally or due to DIY projects. It adheres to all substrates and has an anti-fungal feature to prevent mould in high humidity areas. This Acrylic Latex caulk will do the job. Application is quick, requires minimal tooling, doesn't slump, run or sag, and looks great for a long time.
Excellent in:
High quality acrylic sealant.
Provides a long lasting flexible seal
Use in a wide variety of situations.
Adheres to all substrates.
Has an anti-fungal agent.
Typical Applications:
·sealing of fissures in walls, balustrades, sills
·connecting joints in plasterboard technology
·small plaster repairs before painting
·sealing around window and door frames
·sealing of aerated concrete
·sealing of low movement construction joints between brick, concrete, timber.
Detailed Product Description:
Acrylic sealant is mainly used to seal cracks, joints and slits on door and window frames, window sills, prefab elements, stairs, skirting, corrugated roof sheets, chimneys, conduit-pipes and roof gutters.
Test Result:
1) Basic material: acrylic dispersion
2) Colors: white
3) Solids content: 85%
4) Specific gravity: 1.4
5) Shrinkage: about 15%
6) Extruding property: 160 ml/min
7) Drying time: ≤24 h
8) Tensile adhesion: 0.10
9) Max tension: 260
10) Resin content: 80%

Packing:
280ml / 300ml / 310ml cartridge ,24 cartridges in a carton

milky white/white/clear/transparent/semi-transparent/colored/yellow Hot Melt Adhesive

We here have a wide range of hot melt adhesives, with different colors and appearance such as white, milky withe, transparent
Product information
1 Commodity name: Hot melt glue sticks / hot melt adhesive
2 Brand name: RUICHEM
3 Material: EVA
4 Color: milky white/white/clear/transparent/semi-transparent/colored/yellow
5 Packing: as customers' specific requirements
6 Size: as customers' specific requirements

We here have a wide range of hot melt adhesives, with different colors and appearance such as white, milky withe, transparent, semi-transparent, crystal clear, yellow and so on.

RUICHEM hot melt adhesives are widely used in bookbinding, construction, woodworking, sanitary products, fibre & garments, and etc.

There are many models for you to choose from. We have high-grade, middle-grade, and l ow-grade adhesives to meet customers' specific needs. If you are looking for HMA with special functions, we can customize according to your specific requirements.

YX-997 Butyl Sealant for Insulating Glass Primary Seal

1 20years manufacture experience
2 perfect quality and good price
3 very short delivery time
4 special for insualting glass .
Performance:
1. Appearance: homogeneous black putty.
2. Odor: odorless.
3. Denseness: forever ductility.
4. Density: 1.10g/cm3or less.
5. SuitableTemperature: -40°C+80°C, keep the surface and edges and corners non-cracking,non- drooped.
6. Extruding temperature: 130°C or so.
7. Viscosity of strength:2.5 × 10-3mPa or more (Hard Aluminum / Hard Aluminum.)
8. Water Vapor Penetration Rate:10g / m³ or less.
9. Ultraviolet Radiation Resistance: Qualified
Use:
Mainly used for first-step sealing of insulating glass
and glass curtain wall,fridge and ice tank etc.
Requirements:
YX-997 series of hot melt butyl sealant only can be used with
special butyl rubber coating equipment .The temperature range is between 110-140 °C

Road crack sealant

Crack sealant is flexibility under low temperature, stability under high temperature, water resistance

Crack sealant is a kind of road sealing material that is used by heating. It is made from matrix asphalt, high polymer, stabilizer, additives and other materials processed by special technology. This product has such properties as excellent adhesion, flexibility under low temperature, stability under high temperature, water resistance, anti-aging quality and embedding resistance.

trick film for embroidery

Trick film is widely used for embrodery as cushion,after finishing the embroidery ,it will be peeling off through heat iron.
In rencent years, trick film has been widely used in computer embroidery . Up to now, as substrate when doing the embroidery, it has basically taken the place of traditional paper .

Advantages : no harmfulness to human body and enviroment,
-little remnants left on the cloth,
-nice look of embroidery,
-great improvement of production efficiency,
-and decrease of cost.
The temperature of peeling off the film is about 130C.

The film has passed NR4040 test standard according America quality managment.

Industrial glue

With 20 years experience of gelatin manufacturing and exporting, high quality and competitive price, contact us freely.

Industrial glue description:
1) Industrial bone gelatin use:
a) Often used for making fodder, quality abrasive paper of gauze, polished
cloth, black glue, rubber packing, handicraft adhesive card, wooden furniture,
data plate sign, light at leather, can dye and knit sizing, smelt and plate
the liquid, make up styling gel
b) Sometimes also used as glue additive
2) Bone glue in pearl:
a) Made of animal bones
b) Bone was grounded into powder, dissolved in water, evaporated and dried
into a hard jelly
3) The viscosity is very important for use

YC908 Marble,granite,stone epoxy adhesive

1.excellent resistance to water permenbility
2.can be use in acid and moist environment
3.anti-aging free resine
4.adhesive
YC908 Epoxy stone dry-hanging glue
YC908 is a two component building structure epoxy adhesive,
bonding strength is high,rapid curing .heat resistance .freeze
resistance .
antiaging and waterproof .which is able to a variety
of material .for example stone .
ceramics concrete.metal glass
and so on.also directly bonded to marble and granite.

appearance
White .transparent or light brown
Viscosity (25C)
100,000-180,000MPa S
Proportion (25C)
1.61-1.79g/
Shear strength
25C,72h
11 MPa
JC/T547-94
stretched vertically
25C,72h
≥ 15 MPa
JC/T547-94
Shear.strength of freeze thaw
From -300c/3h to 500c/3h ,25times test
≥ 10 MPa

< br>






Characteristics and advantages
1,This product is the room temperature curing two-component adhesive, without heating, self curing.
2,Bond strength high, especially steel - steel, steel and concrete bonding
3,Excellent toughness and impact resistance
4,Curing speed, suitable for northern cold weather construction
5,Weathering good resistance to heat shock, thixotropy good
Application scope
1,Wall installation, marble, granite, ceramic tile bond installation
2,LiaoChang dry-hanging method installed stone
3,Wet extension-story steel reinforcement, pore seal around
4,Concrete reinforced implantation of various types of bolt anchor, Rachel fixed
5,Binding machine equipment installation, bridge bearings, supporting pad bed fixed
6,All kinds of concrete and metal, wood, China, glass and plastic repairs and bonding part

Redispersible Powder

1.Origin:China
2.Certificate:ISO9001
3.Production capacity:15000MT per year
4.Export from 2004 year.

POLYVAE® YT-6038 is a copolymer powder of vinyl acetate and ethylene. It is dispersible in water and has good saponification resistance.

Application:
1.Flexible thin-bed mortars
2.Concrete repair mortars
3.Gypsum applications
Specification:
Apprearance
White powder,freely flow
Stabilizing system
Polyvinyl alcohol
Additive agent
Mineral Anti-block agent
Product Technical Data
ltem
Unit
Value
Tolerance
Solids content
%
≥98.0
±1
Ash content
%
12
±2
Bulk density
g/l
450-550
±50
Average particle size
μm
~80
—
PH value
—
5.0-7.0
—
MFFT(°C) approx.
°C
0
—
Tg(°C) approx.
°C
-5
--

bone glue used in feed additive

Bone Glue is amber, semi transparent pearl eye grain with good performances in freezing and low viscosity.
Bone Glue is amber, semi transparent pearl eye grain with good performances in freezing and low viscosity. It is widely used in emery cloth, sand paper and textile sizing, electroplated finishes and wooden furniture. Besides the pear like Bone Glue, we also produce erose powder Bone Glue in low cost and large output. Based on QB/T1996-94 standard, we can handle SGS, ITS quality certificate and CIQ veterinary sanitation certificate and the note for changing the certificate of letting pass.
Item
Unit
Superfine grade
First grade
Jelly Strength
(10°C) Bloom g≤
200
180
Viscosity
(15%, 40°C)°E≥
4.0
3.4
(12.5% 60°C) mpa•s ≥
5.0
4.5
Moisture
(105°C)%≤
16
16
Ash
(650°C)%≤
2.5
3.0
pH
(1%, 35°C)
5.5-7.0
5.5-7.0

Use Direction:
Add 2 to 4 times more cold water than the glue, after it got expanded, heat it up and make it the proper concentration. Control the sol temperature below 70°C.

hot melt adhesive for quick easy tape

1-hot melt adhesive for quick easy tape
2-China biggest manufacturer of HMPSA
3-2000TONS/month
4-SGS,ISO,VOC,FDA
THIS KIND OF HOT MELT AEHSIVE IS DESIGNED FOR QUICK EASY TAPES . DIFFERENT PICTURES AS FOLLOWING FOR REFERENCE :
← one piece size:9mm*27mm*27mm

←our customer's product : quick easy tape with our hot melt adhesive ,which could be used to package of sanitary napkins
technical date:
Composition Thermoplastic rubber and Synthetic resins
Solid Content 100%
Ring and Ball softening point: 90-100 ºC
Rolling ball tack: > 8#
Holding power (1000 g, 1 inch2, 23ºC): >20Hr.
180°peel strength to steel: > 18 N/inch
Foreign materials: Invisible by naked eyes
Application methods: slot or roller
Gardner Color 3-4
Brookfield Viscosity
175oC 6000±500cps
Toxicity None
Recommended Application Temp 150ºC-180ºC
Shelf Life One Year